Mona-Guard Revive is a superior product based upon a combination of acrylic, hydrophobic and oleophobic chemistry that provides a restorative, decorative and flexible protection to existing tarmac and concrete surfaces . Mona-Guard Revive ensures avoidance of expensive resurfacing is required and enhances / revives the visual astectis of the surfaces whilst providing a surface that is impermeable to water, grease and stains. Mona-Guard Revive will reduce the maintainance required within its life cycle, maintaining a cleaner and longer lasting appearance.
For use externaly upon domestic, commercial or industrial:
Monaseal provides a technical advisory service for on-site assistance and advice on product selection, evaluation trials and application equipment.
|Colour Range||See colour chart|
|Preparation||Ensure surface to be treated is clean, not contaminated and dry.|
|Application||Brush or medium or long haired roller - Avoid pooling of Mona-Guard Revive|
|Coverage||2-4 m2/Ltr depending on substrate type|
|Curing Time||Touch dry 4 Hrs
Fully cure 28 days
|Equipment Care||Clean with water immediately after use.|
|Pack Size||5 or 25 Ltrs drums, and 1000 Ltrs IBC|
|Storage||Store in dry condictions at temperatures between + 5 & + 35 degree C|
|Shelf Life||12 months in original sealed container|
The surface must be sound, clean, dry, free from frost, laitance, oil, grease and all dust, loose and friable materials must be complately removed from surfaces before application of Mona-Guard Extra.
For use on application for all recommended substrate prepartation materials, please consult the TDS for each material.
*Please note - Monaseal recommend a small trial area to ensure correct application levels are used to obtain the required performance properties subjected to the differing porosity levels of porous building materials.