Mona-Guard Plus is a unique, invisible impregnation utlising hydrophobic and Oleophobic chemistry to provide water repellence, resistance to forms of staining agents and weather pollution on porous building materials.
For use on exterior roofs, facades, floors landscaping products and internally on floors :
Monaseal provides a technical advisory service for on-site assistance and advice on product selection, evaluation trials and application equipment.
|Preparation||Ensure surface to be treated is clean, not contaminated and dry.|
|Application||Low pressure spray, brush or roller.|
|Coverage||3-15 m2/Ltr depending on substrate type|
|Curing Time||Touch dry 2-4 Hrs
Fully cure 24 Hrs
|Equipment Care||Clean with water immediately after use.|
|Pack Size||5 or 25 Ltrs drums, and 1000 Ltrs IBC|
|Storage||Store in dry condictions at temperatures between + 5 & + 35 degree C|
|Shelf Life||12 months in original sealed container|
The surface must be sound, clean, dry, free from frost, laitance, oil, grease and all dust, loose and friable materials must be completely removed from surfaces before application of Mona-Guard Plus.
For use on application for all recommended substrate prepartation materials, please consult the TDS for each material.
*Please note - Monaseal recommend a small trial area to ensure correct application levels are used to obtain the required performance properties subjected to the differing porosity levels of porous building materials.